The barrier lift gate operators are available in both a straight “boom” or an articulated arm, configuration. The unique capability incorporated into these operators is the ability to maintain the horizontal close position as well as the vertical position of the rotating articulated arm. Provided with battery backup operation is assured. Safety first consideration will put the gate arm into an open position if all power sources fail. Each operator is capable of operating at voltages from 115, 208, 230, 460 or 575 VAC single phase, 3 phase multi-voltage transformer

Get Quote

Description

Product Description

The GLWD Family of Barrier Lift Gate Operators utilize our advanced adaptive motor and control system technology that enables significantly higher power density, dramatically better performance and continuous system operation on battery power during loss of AC power.. Each operator is capable of operating at voltages from 115, 208, 230, 460 or 575 VAC single phase, 3 phase multi-voltage transformer.

Features:
  • Barrier lift gate booms can be wood or aluminum and  can support booms of 10ft, 12ft, 14ft,16ft, and 24ft  long.
  •  Closed loop control motion profile technology
  •  Individual, programmable lift and lowering speeds, with controlled acceleration and deceleration for smooth, soft start and soft stop motion profiles
  • Obstruction sensing with programmable threshold level
  • Interlock capability with security system
  • Every model is rated for high usage and high reliability at [240 cycles/hr, over 5000 cycles per day, continuous daily operation]
  •  All GDI operators can be powered by 115, 208, 230, 460, 575 VAC at 60Hz
  • All GDI operators can have battery backup capability
  • Weatherproof
  • Fail-safe brake with manual disengage
  • Utilizing our advanced AlgorithmDriveTM4-quad, closed loop technology
  • Adjustable motion profile; with ‘S’ curve soft start and soft stop gate movement
  • Controlled smooth, immediate or delayed reversing due to obstruction
  • Electronic feedback of gate position ensures long term, accurate horizontal positioning
  • Simple horizontal and vertical gate position calibration
  • Field settable change of gate direction from left or right side operator position
  • Adjustable time delay for automatic lowering of gate
  • Intelligent DiagnosticTM, clear text information display on LCD
  • Simple menu operation with keypad and LCD (password access)
  • 7 programmable inputs for loop sensors, Ultrasonic sensors,
    Radio control, other sensors etc.
  • Two programmable outputs to control enunciator buzzer, light or interlock
  • Programmable electronic open/closed position holding capability
  • Electronic overload protection; no mechanical clutch
  • Key/switch electronic operator disable
  • Network up to 128 gates
  • Cycle counter
  • Computer interface
  • 24VAC to power accessories